 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HIGH ISOLATION VOLTAGE HIGH COLLECTOR TO EMITTER VOLTAGE SOP MULTI OPTOCOUPLER FEATURES * HIGH COLLECTOR TO EMITTER VOLTAGE VCEO = 300 V : PS2832-1,-4 VCEO = 350 V : PS2833-1,-4 * SMALL THIN PACKAGE 4, 16-pin SOP, pin pitch 1.27 mm * HIGH ISOLATION VOLTAGE BV = 2500 Vr.m.s. * HIGH CURRENT TRANSFER RATIO CTR = 2000 % TYP * TAPING PRODUCT NUMBER PS2832-1-F3, F4, PS2833-1-F3, F4 PS2832-4-F3, F4, PS2833-4-F3, F4 PS2832-1,-4 PS2833-1,-4 DESCRIPTION PS2832-1,-4 and PS2833-1,-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington-connected phototransistor. The package is an SSOP (Super Small Out-Line Package) type for high density mounting applications. APPLICATIONS * HYBRID IC * TELEPHONE / TELEGRAPH RECEIVER * FAX ELECTRICAL CHARACTERISTICS (TA = 25C) PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 10 mA Reverse Current, VR = 5 V Terminal Capacitance, V = 0, f = 1.0 MHz Collector to Emitter Current IF = 0 mA, VCE = 300 V Current Transfer Ratio, (IC/IF) IF = 1 mA, VCE = 2 V Collector Saturation Voltage, IF = 1 mA, IC = 2 mA Isolation Resistance, Vin-out = 1.0 kVDC Isolation Capacitance, V = 0, f = 1.0 MHz Rise Time1, VCC = 5 V, IC = 10 mA, RL = 100 Fall Time1, VCC = 5 V, IC = 10 mA, RL = 100 UNITS V A pF nA % V pF s s 1011 0.4 20 5 400 2000 15 400 4500 1.0 MIN VF IR C ICEO CTR PS2832-1, -4, PS2833-1, -4 TYP 1.2 MAX 1.4 5 Transistor Coupled Diode VCE(sat) RI-O CI-O tr tf 1. Test Circuit for Switching Time PULSE INPUT 1 ms ( PW =Cycle = 1/10 ) Duty IF 50 VCC Vout RL = 100 California Eastern Laboratories PS2832-1, -4, PS2833-1, -4 ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS Diode IF VR PD/C PD IF(Peak) Transistor VCEO VECO IC PC/C PC Coupled BV TA TSTG PARAMETERS Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current PW = 100 s, Duty Cycle 1% Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage2 Operating Ambient Temp. Storage Temperature UNITS PS2832-1 mA V mW/C mW/Ch A RATINGS PS2833-1 PS2832-4 50 6 0.6 60 1 0.8 80 PS2833-4 V V mA/Ch mW/C mW/Ch Vr.m.s. C C 300 350 0.3 60 1.2 120 2500 -55 to +100 -55 to +150 300 350 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS2832-1 PS2833-1 2.70.3 4 3 4 3 PS2832-4 PS2833-4 16 15 14 13 12 11 10 9 1. 2. 3. 4. 1 2 Anode Cathode Emitter Collector 10.30.3 16 9 1 2 3 4 5 6 7 8 0.10.1 0.15+0.10 -0.05 1 2.3 -0.2 +0.3 2 7.0 0.3 4.4 1.3 1 2 -0.2 2.0 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 8 7.0 0.3 4.4 0.15 -0.05 +0.10 Anode Cathode Emitter Collector 0.5 0.3 1.27 0.4 0.10 0.12 M 1.3 +0.3 0.1 0.1 1.27 +0.10 0.40 -0.05 0.63 MAX 0.12 M 0.5 0.3 MARKING PS2832-1 PS2833-1 PS2832-4 PS2833-4 NEC PS2832-4 N 003 No. 1 pin mark Country Assembled Type Number Assembly lot 32 003 Assembly lot Last number of type No. 32/33 0 03 Week Assembled Year Assembled (Last 1 Digit) N 0 03 Week Assembled Year Assembled (last 1 digit) CTR Rank Code PS2832-1, -4, PS2833-1, -4 TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation, PC (mW) 100 120 Diode Power Dissipation, PD (mW) 80 100 PS2832-1, -4 PS2833-1, -4 80 PS2832-4 PS2833-4 0.8 mW/C 60 60 40 PS2832-1 PS2833-1 0.6 mW/C 1.2 mW/C 40 20 20 0 25 50 75 100 0 25 50 75 100 Ambient Temperature, TA (C) Ambient Temperature, TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 TA = +100 C +60 C +25 C COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 5 mA 3 mA 2 mA 1 mA 10 5 IF = 0.5 mA 1 10.4 Forward Current, IF (mA) 10 5 0 C -25 C -50 C 1 0.5 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 Collector Current, IC (mA) 50 0.6 0.8 1.0 1.2 1.4 1.6 Forward Voltage,VF (V) Collector Saturation Voltage, VCE(SAT) (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100 50 5 mA 3 mA 2 mA 1 mA Collector to Emitter Dark Current, ICEO (nA) 100,000 VCEO = 300 V 10,000 1000 Collector Current, IC (mA) CTR = 1068 % 2290 % 4360 % 10 100 5 10 IF = 0.5 mA 1 -50 1 -25 0 25 50 75 100 0 1 2 3 4 5 Ambient Temperature, TA (C) Collector to Emitter Voltage, VCE (V) PS2832-1, -4, PS2833-1, -4 TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified) NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE CURRENT TRANSFER RATIO vs. FORWARD CURRENT 4500 VCE = 2 V Normalized Current Transfer Ratio, CTR 1.4 1.2 1.0 Current Transfer Ratio, CTR (%) 4000 3500 3000 2500 2000 1500 1000 500 0 0.1 Sample A B C 0.8 0.6 0.4 0.2 0.0 -50 Normalized to 1.0 at TA = 25C, IF = 1 mA, VCE = 2 V -25 0 25 50 75 100 0.5 1 5 10 40 Ambient Temperature, TA (C) Forward Current, IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 1000 1.2 LONG TERM CTR DEGRADATION IF = 1 mA TA = 25C VCC = 10, IC = 10 mA, CTR = 2300 % tr tf 1.0 Switching Time, t(s) 100 CTR (Reliable Value) 0.8 60C 0.6 10 td ts 0.4 1 0.2 0.1 10 50 100 500 1000 0.0 10 10 2 10 3 10 4 10 5 10 6 Load Resistance, RL () Remark: The graphs indicate nominal characteristics. Time (Hr) ORDERING INFORMATION PART NUMBER PS2832-1 PS2832-1-F3 PS2832-1-F4 PS2832-4 PS2832-4-F3 PS2832-4-F4 PS2832-1-V PS2832-1-V-F3 PS2832-1-V-F4 PS2832-4-V PS2832-4-V-F3 PS2832-4-V-F4 16 pin SOP Magazine case 45 pcs Embossed Tape 2500 pcs/reel 4 pin SOP 50 pcs (Tape 50 pcs cut) Embossed Tape 3500 pcs/reel 16 pin SOP Magazine case 45 pcs Embossed Tape 2500 pcs/reel PACKAGE 4 pin SOP PACKING STYLE 50 pcs (Tape 50 pcs cut) Embossed Tape 3500 pcs/reel PART NUMBER PS2833-1 PS2833-1-F3 PS2833-1-F4 PS2833-4 PS2833-4-F3 PS2833-4-F4 PS2833-1-V PS2833-1-V-F3 PS2833-1-V-F4 PS2833-4-V PS2833-4-V-F3 PS2833-4-V-F4 16 pin SOP Magazine case 45 pcs Embossed Tape 2500 pcs/reel 4 pin SOP 50 pcs (Tape 50 pcs cut) Embossed Tape 3500 pcs/reel 16 pin SOP Magazine case 45 pcs Embossed Tape 2500 pcs/reel PACKAGE 4 pin SOP PACKING STYLE 50 pcs (Tape 50 pcs cut) Embossed Tape 3500 pcs/reel PS2832-1, -4, PS2833-1, -4 TAPING SPECIFICATIONS (Units in mm) TAPE OUTLINE AND DIMENSIONS 2.0 0.1 4.0 0.1 o1.5 0.1 1.75 0.1 2.8 MAX 16.0 0.3 7.5 0.1 7.55 0.1 0.3 2.30.1 1.55 0.1 4.0 0.1 2.85 0.1 TAPE DIRECTION PS2832-1-F3 PS2833-1-F3 PS2832-1-F4 PS2833-1-F4 003 003 003 003 32 32 32 32 REEL OUTLINE DIMENSIONS 32 003 32 32 32 32 32 R 1.0 21.0 0.8 1005.0 330 Packing: 3500 pcs/Reel 003 003 003 003 003 2.5 2.0 0.5 13.0 0.5 16.4- 0.0 +2.0 PS2832-1, -4, PS2833-1, -4 TAPING SPECIFICATIONS (Units in mm) TAPE OUTLINE AND DIMENSIONS 1.75 0.1 2.0 0.1 4.0 0.1 2.8 MAX 1.55 0.05 7.5 0.1 16.0 0.3 0.3 1.55 0.1 8.3 0.1 12.0 0.1 TAPE DIRECTION PS2832-4-F3 PS2833-4-F3 PS2832-4-F4 PS2833-4-F4 REEL OUTLINE DIMENSIONS 10.7 0.1 2.5 2.0 0.5 13.0 0.5 1005.0 R 1.0 21.0 0.8 330 16.4- 0.0 +2.0 Packing: 2500 ppcs/reel PS2832-1, -4, PS2833-1, -4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). Package Surface Temperature T (C) (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) Time (s) (2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). (3) Cautions * Fluxes Avoid removing the residual flux with chlorine-based cleaning solvent after a reflow process. CAUTIONS REGARDING NOISE Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at start-up, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 01/24/2002 |
Price & Availability of PS2832
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |